Custom production
Natural stone cut to about 25 mm, so a wall of real stone can be built where full-bed masonry cannot go — over existing surfaces, on interior walls, and without a separate footing.
Seven formats, from large Castle Stone blocks to tightly stacked Micro Ledge, each pre-laid into calibrated pieces with corner pieces cut from the same stone. Colours, course heights and quantities are made to the project.
7 formats
Every format is cut and pre-laid into calibrated pieces, so the wall goes up in the pattern shown. Corner pieces are made in the same stone for every format except Micro Ledge.
Format 01
The grandest face in the range: large squares and rectangles laid in a repeating pattern, so a wall reads as cut masonry from a distance. Pieces are calibrated and pre-laid, and corner pieces are made in the same stone.
8 colours
See Castle Stone
Format 02
A three-course format, sawn top and bottom. Three course heights used together give a high-end coursed wall that is quick to lay, because every piece already sits at a set height.
7 colours
See Ashlar Stone
Format 03
The classic ledgestone look: random lengths in shallow courses, with enough relief to catch light across the wall. The most widely specified of the seven formats.
7 colours
See Ledge Stone
Format 04
Thin, tightly stacked courses of roughly one inch. The densest texture in the range, and the one that carries a whole feature wall on its own. Supplied as pre-laid panels.
One colour
See Micro Ledge
Format 05
Sawn on all four sides, so the joints run straight and the face sits flat. The modern end of the range, supplied in a natural or honed finish.
2 colours
See Sawcut Ledge Stone
Format 06
Irregular pieces with small fillers between them, laid the way a fieldstone wall is built by hand. The most traditional face in the range, and the least repetitive.
4 colours
See Field Stone
Format 07
The pieces that finish a veneered wall: 50 mm treads, steps and wall caps cut from the same stones, with a hand-chiselled or sawn eased front edge and the other three edges sawn.
13 colours
Why thin veneer
Ordering details
12–20 weeks for the initial quantity, depending on complexity, project location and availability of raw material.
Samples and quotations
Send the format, colour, quantity and project location, and we will reply with samples, availability and a quotation.
